Residents of Grand Junction, CO, know what living in cold climates requires a furnace system that is effective and consistent. However, no matter how reliable your furnace is, it will eventually require some form of maintenance or repair services to keep it running smoothly and efficiently.
There are several common issues that can cause a furnace to malfunction. Some of the most common issues include:
Dirty or clogged air filters: When the air filters in your furnace become dirty or clogged, it can restrict the flow of air through the furnace, causing it to malfunction.
It is generally recommended to change the air filters in your home furnace every 1-3 months, depending on several factors such as the type of filter you are using, the level of contamination in your home, and the amount of use your furnace gets.
If you have pets or live in a particularly dusty area, you may need to change the filters more frequently. On the other hand, if you have a high-quality filter and don't use your furnace very often, you may be able to go longer between changes.
It is a good idea to check the filters every month and replace them as needed. You should also consult the owner's manual for your specific furnace to see if it has any specific recommendations for filter replacement.
Failed ignition system: If the ignition system in your furnace is not working properly, it can prevent the furnace from starting or cause it to shut off unexpectedly.
Dirty burners: When the burners in your furnace become dirty, it can affect the efficiency of the furnace and cause it to malfunction. In a home furnace system, the burner is a component that is responsible for generating heat. It typically consists of a fuel source (such as natural gas or propane) and an ignition system. When the thermostat calls for heat, the burner is activated and the fuel is ignited, producing flames that heat the air inside the furnace. The heated air is then distributed throughout the home through a series of ducts and registers. The burner is an important part of the furnace and plays a key role in the overall heating process.
Failed thermostat: If the thermostat in your furnace is not working properly, it can prevent the furnace from turning on or cause it to turn off unexpectedly. There are several common issues that can cause a home thermostat to stop working. Some of the most common issues include:
- Dead batteries: If the thermostat is powered by batteries, it's possible that the batteries are dead or low on power.
- Loose wiring: If the thermostat is hardwired into the electrical system, it's possible that the wiring is loose or has become disconnected.
- Failed components: The thermostat may have failed components, such as a broken display or malfunctioning sensor, which can prevent it from functioning properly.
- Incorrect settings: If the thermostat is set to the wrong temperature or mode, it may not function as expected.
- Compatibility issues: If the thermostat is not compatible with the HVAC system, it may not function properly.
- Dirty or damaged sensors: The thermostat's sensors may be dirty or damaged, which can prevent it from functioning properly.
- Leaking or blocked flue: If the flue, or chimney, in your furnace is leaking or blocked, it can prevent the furnace from functioning properly.
- Electrical issues: Electrical issues such as loose connections, damaged wiring, or a tripped circuit breaker can cause a furnace to malfunction.
In essence, there are many different reasons why a home furnace is not working properly or won't turn on. If you are experiencing issues with your furnace, it is always best to contact a professional HVAC technician at Pride Plumbing Heating And Cooling to diagnose and repair the problem.